product information
-
Features
- Mixing rate : 100% (40 L of water for 40 kg of plaster).
- Thickness: 1 to 3 cm depending on the nature and condition of the support.
- Cycle duration: 40 min end of setting.
- Yield kg/m2 : 13 kg (for 1.5 cm thickness).
GYPSAT Plus, Construction plaster
Plaster TAOUAB GYPSAT Plus specially designed for coating and interior plastering of walls and ceilings of raw substrate types(brick, block, stone...).Its constituents give it : • Good surface hardness (60 shore C in the dry state). • Very good finishing quality (smooth white surface) does not require the application of paint coating.
ficher technique
- download
- Telecharege
product information
- Features
- Mixing rate : 70% (70 L of water for 100 kg of plaster).
- Thickness : 1,5 cm depending on the nature and condition of the support.
- Cycle duration : 90 mn (end of setting).
- Yield kg/m2 : 13 kg/m2 /1,5 cm of thickness.
PT 16
The PT16 projected mortar from TAOUAB, plasters is a product formulated with plaster, it is applied using projection machines on walls and ceilings in the raw state (brick, block, stone, etc.).
• Good surface hardness (70 shore C in the dry state).
• Easier stock management on construction sites due to the use of a single product (instead of storing both sand and cement).
ficher technique
- download
- Telecharege
product information
-
Features
- Setting time : 30 minutes / 8 hour / 24 hour.
- Quality: extra fine.
- Mixing rate (water / powder) : 0.38 - 0.48 %.
- Tape adhesion : >1000 g.
- Cracking: no cracks up to 2 mm thick.
- * These characteristics are certified by the Technical Assessmen
Plastering TAOUAB 30Mn / 8H /24HS
Coating Powder based on plaster, calcium carbonate, resin, and various additives Can be used on types of plasterboard with or without insulation with thinned edges and with cardboard faces.
• Ideal for cold and humid weather / Very nice finish on the joints. (Enduit 30 Mn)
• Long working time / mechanically applicable / Replaces Coated, 24H in case of difficult climatic conditions. (Plaster 8H)
• Manual or mechanical application / Well suited for large construction sites / Extremely long working life. (Plaster 24H)
ficher technique
- download
- Telecharege
product information
-
Features
- Fineness: extra fine.
- Mixing rate (water / powder) : 0.35 - 0.40.
- End of grip : 24 H.
- Consumption : 1 kg/m2for each thickness of 1 mm.
- Compacted density : 950 - 1000 kg / m3.
FINISH, plaster of Interior Finish
the plaster FINISH is a powder for interior finishing works, can be used on walls, ceilings and floors, painted supports, wallpapers, thin coverings.
ficher technique
- download
- Telecharege
product information
-
Features
- Mix report : (0.75 -0.85 %).
- Beginning of grip : (04.00 -6.00 min).
- End of grip : (08.00 -14.00 min).
- Apparent density : 0.65 -0.75 kg/l.
- Surface hardness : ≥ 55 shore C.
- Fineness Sieve 100 μm : ≤ 20 %.
- Sieve 200 μm : ≤ 10 %.
MOOL PLUS, Casting plaster
Moulding Plaster (MOOL Plus) is a pure semi-hydrated plaster, white in color, produced from natural gypsum from the Taouab region, the title of which is approximately 93%. This product is used for finishing work in staff and for the production decorative elements by casting and modeling (rosettes, molded sculptures, ceilings).
ficher technique
- download
- Telecharege
product information
-
Features
- Mixing rate : 0.40 % - 0.50 % .
- Water retained : 2-4 mm.
- Setting time : 02 H.
- Consistency: good.
- Surface appearance: good.
- Adhesion: Excellent.
- Fire reaction A1.
- Consumption from 1 to 3 kg/m2.
PLACOL,Adhesive mortar
TAOUAB PLACO mortar is a product formulated with plaster. It is used to lay plasterboard indoors and also to fill in non-adjoining sheets.
ficher technique
- download
- Telecharege
product information
- Features
- Apparent density : 50 - 80 kg/m3.
- Compacted density : 60 - 100 kg/m3.
- Colour: white / grey-white.
- Value PH : 7 - 9.
- Quantity de : SiO2 = 60 - 80%.
PERLIT CONSTRUCT,Perlite for construction
La PERLITE is used in particular for the insulation of lost attics by insufflation in the walls, it is widely used in applications where fire safety is an essential requirement. Light concretes - Light plastering mortar -Wall and screed insulation - Roofs.
ficher technique
- download
- Telecharege
product information
PERLIT AGRO, Perlite for agricultural use
Hydroculture, germination, root development, soilless production in greenhouses and nurseries; cultivation of cut flowers, improvement of soil moisture balance, improvement of sunshine. La PERLITE is also suitable for field renovations, by placing it directly on the ground or for lawn surfaces.
ficher technique
- download
- Telecharege